Lavern Prell asked 2 months ago
Repairs to uPVC Windows
uPVC is an excellent option for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they are not susceptible to get rusty or decay.
It is essential to clean and oil UPVC doors and windows regularly. This will reduce repair costs and improve the efficiency of energy.
1. Broken Glass
If the glass in your window is broken it can cause a great deal of damage to your home, which can make it extremely dangerous and possibly fatal. It is crucial to take the time to make sure that you’re doing all you can to keep your windows in good repair.
For single pane windows, it is relatively easy to replace windows, and the new one is usually able to fit into the frame that was previously installed easily. However If you have double glazed window repairs near me pane windows that are held in place by internal beading it will be more difficult to take out the panes that are in place and replace them with new ones. In this instance it is essential to purchase plastic spacers to make sure that the new pane fits into the window frame.
Wearing protective eyewear and thick gloves is essential if you plan to remove the glass yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window repairs panes to ensure that any shards fall on the fabric and not onto the floor and could be trampled under.
Once the glass is removed from the window, it’s best to seal the gap with some clear packaging tape or duct tape to block water and drafts from entering the home until a professional is able to come out and fix the window. It also acts as a barrier, deterring any intruders to gain access to your home. If the gap between the window and the door is significant, you may need to consider an alarm system that has a window. This will give you the best of both.
2. Sagging
uPVC windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows made of sash. As time passes, they may develop a variety of issues such as sagging. A sagging window can cause problems with light, draughts or even security. It is crucial to act when you notice your uPVC windows are sagging.
To fix a window that is sagging you can try repositioning the hinges. You’ll first need to open the windows to reach the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Once you’ve repositioned the hinges, close the window and verify the an appropriate fit. If you’re satisfied with the size of the window, tighten the screws to keep them in the right position.
If you aren’t able to move the hinges, you might need to replace the seal. Over time, rubber seals lose their elasticity and dry out which causes them to loosen. If this happens, it’s crucial to replace the seal as soon as you can to ensure that your uPVC windows are waterproof and draught-proof.
UPVC handles can also loosen. Often this is due to screws that have come loose over time. However, it can be due to the fact that the handle mechanism has worn out. It’s relatively simple to fix a loose uPVC hand. First, you’ll need to close the window and then perform a test fit. The corners of the sash need to be aligned with the casing joint. If it isn’t then you can use a screwdriver to loosen the handle and turn the mechanism back into position.
3. Water Leaks
It is important to take action if you awake each day to find mouldy walls and double glazed window repairs near me floors that are wet. The leaks of water through windows could cause structural damage to your home, and hinder your ability to control the temperature inside your home. The most common reason for leaks in uPVC windows is that the sealant around the frame is either damaged or not present.
This is a fairly simple fix that can be completed by any DIY expert. Based on the severity of the issue the old caulking may require removal before a new layer can be put on. It is crucial to remember that when it comes to uPVC window repair repairs, you should avoid the temptation to “over-caulk in order to make the area more difficult to clean and could reduce your energy efficiency.
It is essential to ensure that any drainage holes are clear of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more extreme situations, you may have to replace the window.
Mold spots and rotten sills are other signs of water leakage. This mold thrives in damp environments and is able to quickly spread throughout the house.
If the leakage occurs between the double-glazed glass it is more likely the problem is with the seal rather than the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.
4. Faulty Hinges
If your uPVC windows are difficult to open, or are loose and blow open with ease It could be hinges that are at the fault. These are easily replaced by any competent DIYer and can be completed in just a few minutes.
Almost every household in the UK will have top-hung or side-hung uPVC windows that have hinges and like any mechanical part they can wear down over time. Changing a window hinge is an easy process but it can be easier to do with someone else to help hold the frame in place.
It is also important to verify that the uPVC hinges are opening and closed in the correct direction. Look for the arrows that are on each hinge to determine which way the window should be opened.
Faulty window hinges could be caused by improperly opening the window a certain way or by improper installation in the factory. This can often be resolved by sending us a photo through our website and we will be more than happy to give you suggestions.
It is also essential to lubricate the hinges regularly. Applying a light engineering lubricant to the hinges is an ideal method to accomplish this. We suggest using the lubricant that doesn’t contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also helps prevent corrosion and reduce the possibility of sticking. This should be done at least once a year. WD40 or other solvent-based lubricants should not be used as they can damage your uPVC windows.
5. Draughts
Draughts can be caused by several different things. Firstly the hinges, again because of wear and tear, can become misaligned, this will cause a gap to form where the sash joins the frame. If they’re beyond repair, it might be required to realign them. Second, the interlock can also become disaligned. This is located on the hinge’s side and might require to be cleaned. In some instances, it may be necessary to replace these.
These seals can wear down or get damaged over time, allowing air escape. Installing high-quality weatherstripping is a good way to prevent draughts. Another alternative is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures and again will lessen the possibility of draughts.
Another method of reducing the amount of draughts is to use a Draught-excluder. These are usually fabric tubes filled with a filler which can be placed over your window sill. These will keep your home warm by blocking cold air.
With a little regular maintenance and repair windows made of upvc will continue to provide an excellent level of security and insulation for your home. It is essential to remember that all windows will eventually become worn out, and it may be more cost-effective to simply replace them rather than repair them. If you have any problems with your upvc window it is recommended to speak with an expert as soon as you can.