Indisputable Proof That You Need Sash Window Repair

DWQA QuestionsCategory: QuestionsIndisputable Proof That You Need Sash Window Repair
Milla Darcy asked 2 months ago

Sash Window Repair

Sash windows may become out of balance or even break. Pam is on the lookout on the internet for salvaged wavy glasses, and keep an eye out for discarded metal sashweights. She then looks for replacements, such as nuts or washers, to help balance her window.

Pam beds each pane with a rope of glazing compound she works into the rabbet groove, also known as a pocket, which is located around the opening. This prevents drafts and reduce the cost of heat loss.

Sashes that stick Sashes

It’s a nightmare if your double-hung windows are stuck. They’ll rattle in the event of storms and you’ll lose view. A window that’s too loose may allow in air and noise, which will increase your energy bills. Both scenarios are not ideal, but both could be fixed with the right tools and a little determination.

One of the most common issues with weighted sash windows is that paint may get sucked into the channels that they slide on, making them jam. Most of these problems can be resolved by cleaning and oiling the tracks.

Start by removing the caulking that was between the window stop (the internal one) and the window frame. Scrape off any paint that has built up. Make use of a sharp knife and place sheets of plastic as well as dust-collecting vacuum cleaners below the surface to collect any paint dust or chips.

Then, wipe the tracks using a dry cloth, and apply a silicone lubricant for better glide. This lubricant is sold at most home improvement shops or on the internet. You can test it by moving the sash either upwards or downwards.

If it still jams it could be due to an issue with the sash cord. Check to see if the cord is caught or hung in the sash or snapped. If this is the case, you’ll need to replace the window’s cord.

Another reason for the jam could be that a pin that holds the meeting rail in place has slipped out. It isn’t easy to fix and you will have to call a professional most of the time.

You can use a wood softener when the wood is swelling and warped, but there’s not a pin. It’s a quick drying liquid that can aid in restoring damaged wood, so you’ll be able to fix your sash window without having to remove it completely. After you’ve used it you’ll be able to break the two sashes by placing a block of wood on top of the bottom corner where they meet, and tapping it lightly with a hammer.


Draughts can be a problem with sash windows that are old particularly in winter. Often caused by rotten timbers, cracked putty, worn sash cords or unbalanced weights that let cold air seep into the window and make it difficult to keep your home warm. There are several ways to stop draughts from coming through your windows with sash, for example, filling any gaps with expanding foam or using draught excluder strips that you can purchase at many hardware stores. They’re effective however, you will require replacing them regularly because the foam expands with use.

Gapseal is a stronger solution that is more permanent. It’s a spongy rubbbery seal you can cut and push in the gaps between the window frames of the sash. It can be used alone or with adhesive strips on the top and bottom. This option is costly and you will need to reapply it throughout the life of your window. But, it’s a long-term fix and is easy to remove.

Cling film can also be used to block drafts. Simply scrunch it and then insert it into all the gaps that surround your window. This is a good draught-stopper, but it can also hinder the sash’s movement and cause a fire. Additionally the sash will have to be removed to re-open the door and the cling film will need to be applied each time you close the sash.

A better option is to have your windows draught-proofed as part of a general refurbishment service. This could include the replacement of sash cords and staff beads, parting beads, lubrication of pulley wheels, and rebalancing the weights, in addition to staining or painting the frames and sashes. This can aid in restoring the function of the sash, and HomePage increase its energy efficiency, in addition to dealing with any minor timber defects. It’s less disruptive than replacing windows altogether and will significantly reduce draughts and improve your home’s thermal efficiency.


If your windows are sash and have suffered damage or decay the good news is they are not necessarily beyond repair. The timber used in the frames of these windows is generally of very high-quality and, with the right restoration, can be restored to provide the best performance for a long time. The key is regularly checking the frames and ensuring that the timber is properly ventilated to stop the accumulation of moisture which can lead to wood to rot.

The majority of issues that arise from sash windows are readily apparent, however some are more difficult to spot. Wood decay is a challenge to fix, as the fungus consumes the wood. It is possible to repair rotten sections of timber, however the best way to avoid further rot is to make sure the timber is kept dry.

The first thing to do is to remove any paint off the hardware. The bottom rail and meeting rail might have to be removed from the frame (depending on the position of your sash). The “pocket covers” are tiny pieces of wood that are placed on the frame’s side that permit access to the weights, should be removed. These are often put in place by nails and then covered with paint, so you’ll likely require an instrument to break them loose. After the pockets have been removed, you can begin slicing out any wood decay and apply an extremely high-quality water-resistant filler. Once the filler is dry, a coat of primer should be applied to prevent further decay.

It is a smart idea to examine inside the window for weights of the sash to ensure that they are balanced. They shouldn’t be displaced or pulled one side more strongly than the other. The sash may fall off its track if it is not balanced. This could cause the frame to fall or be damaged. You can replace the sashweights using new ones, or put in an updated balancing system to stop the sash from swinging the wrong direction.

Poor Security

Sash windows are vulnerable to wear and damage from weather and wear over time. Over time, this can lead to timber decay which in turn will need to be replaced, a costly repair that needs to be addressed as soon as is possible. Water marks on the window or a frame that is soft could indicate decay of the wood. It is important to consult an expert to assess the situation, and determine if any sash window repairs are necessary.

As time passes the rails at the bottom can also be damaged. This can be seen by the presence of water marks on the sill, or the window becoming soft to touch. A professional will be needed to examine the situation and recommend any necessary repair of sash windows or replacement.

double glazing repairs and triple glazed sash windows do an amazing job at keeping noise pollution out of the home, so it can be a real cause for worry when they begin to let it back in. If this happens the structural integrity of sash windows may be in danger and will likely need to be replaced by a different option.

A common issue with repairing sashes is when the sash becomes stuck in the frame. This can be caused by the cord snapping or a problem with sash ratchets. If the problem is related to the sash ratchets, a little gentle persuasion is often the best solution.

Removal of the sash from the frame and clearing the tracks of any dust or dirt can often help resolve this issue. After cleaning the tracks, take off any security fittings, and then remove the sash cords or chains. The staff bead can be sealed with a draught-proof seal to reduce the possibility of draughts. This can also improve the paint finish. The gap between the box and sash can be filled with decorators caulk to enhance the operation of the sash and lessen draughts.